Product Details
Mould rack is also known as mould rack or drawer rack. It mainly stores all kinds of mould articles. According to load, it can be divided into light mould rack and heavy mould rack. Mobile hoist crane can be equipped on the top of the rack to lift the mould.
Mold shelf production process:
The die rack is made of 100 channel steel, which is rolled by a rolling mill at one time. Drawer board structure is usually welded by rectangular pipe and 4.0 bending parts. The guide groove is formed by bending 4.0 steel plate. The top and bottom are connected by beams, and the top is covered by roofs to store goods. Mainly applicable to the storage of various mold items. According to the carrying capacity, it can be divided into light-duty and heavy-duty shelves. The top of the shelf is equipped with a mobile crane to facilitate the lifting of the mould. Common surface treatment schemes for shelves are spraying, spraying, hot-dip galvanizing and cold-dip galvanizing.
Mould frame processing methods: spraying paint, spraying plastic, hot galvanizing, cold galvanizing. Hot dip galvanizing is the most effective antirust method nowadays. Mould frame is widely used in spraying paint and plastic spraying. Each floor bears 800kg. Specification: H1470XW850XL2000 (mm) crane bears 500 kg.
Characteristic of mould shelf:
1. Combination device, mainly composed of pillar, guide groove, drawer layer, pull rod, positioning pin, etc.
2. Bolt connection is adopted, the structure is stable, safe and reliable, and it is generally used in rows.
3. Drawer-type die rack is mainly composed of slideway and drawer plate. Drawer plate is composed of rectangular pipe welded structure, bending parts and steel plate.
4. Each slideway is fixed by two bearings. It can roll freely in the guide groove, with little resistance and easy to pull out the drawer.
5. For the sake of safety, positioning pin and limit pin are designed to ensure the safety of drawer board when it is pulled out.
6. The shelf load of light-duty die is 200-800kg/floor. Heavy drawer-type die rack bears between 800 and 1500kg/floor.
7. Mold rack occupies small space, has large layers, has detailed classification and simple operation.
8. The die holder can also be used as a drawer tray on the cross beam of the shelf, which saves the cost and makes the structure more stable.
Die shelf parameters:
Die load-bearing: 800-1000kg/drawer board, all load-bearing 9.6-12t
Product pull out: drawer board can pull out 65%
Product color: customizable
Product Note: The length of standard die base is not only 1470 mm, but also 4 squares. (L1470 mm) is a set of die base, which can be lengthened arbitrarily in practical use. This process does not need to be added, manual, material or process, just one by one connected to complete the column.
